Engine Valve Cover Set with Gaskets (Front & Rear) FIT 2008-2017 Honda Accord Odyssey Pilot Ridgeline, 2012-2015 Acura TL RDX 3.5L V6, Replaces 12310-R70-A00 12310-R70-A10 12320-R70-A00

OE Part Number Cross-Reference: - Front Cover: 12310-R70-A00, 12310-R70-A00, 264-491 - Rear Cover: 12310-R70-A10, 12320-R70-A00 Vehicle Compatibility Matrix: FIT 2008-2017 Honda Accord 3.5L V6 Engine Valve Cover Set FIT 2008-2017 Honda Odyssey 3.5L V6 Engine Valve Cover Set FIT 2009-2015 Honda Pilot 3.5L V6 Engine Valve Cover Set FIT 2009-2014 Honda Ridgeline 3.5L V6 Engine Valve Cover Set FIT 2012-2014 Acura TL 3.5L V6 Engine Valve Cover Set FIT 2013-2015 Acura RDX 3.5L V6 Engine Valve Cover Set Technical Specifications: - Material: Die-Cast Aluminum Alloy (Replacement for Plastic OE) - Gasket Material: High-Heat FKM Fluororubber - Configuration: Front (Bank 2) and Rear (Bank 1) Set - Hardware: Integrated PCV Baffles and Pre-installed Seals Professional Installation Advice: To ensure a leak-free seal, the cylinder head mating surface must be completely free of residual oil and old gasket material. Do not over-torque mounting bolts; use a calibrated torque wrench to reach 8 N-m. This kit is designed for J35 V6 engines with matching OE numbers.

• FIT 2008-2017 Honda Accord 3.5L, 2012 Crosstour, 2008-2017 Odyssey, 2009-2015 Pilot, 2009-2014 Ridgeline, and 2012-2015 Acura TL RDX. This Engine Valve Cover Set is a direct mechanical match for the J35 V6 series. Position: Front (Radiator Side) and Rear (Firewall Side).
• Includes high-temperature FKM fluororubber gaskets rated for thermal compression cycles. The Cylinder Head Cover with Gasket features precision-machined flanges to ensure a flush-mount interface with the cylinder head. Surface treated with a black epoxy finish for resistance against environmental road salt and moisture exposure.
• 【Vehicle Fitment FIT 2012-2014 Acura TL / 2013-2015 Acura RDX】 FIT 2012-2014 Acura TL 3.5 L｜FIT 2013-2015 Acura RDX 3.5 L — precisely machined flanges align with OEM head geometry; front (radiator-side) and rear (firewall-side) covers included for a complete bank swap.
• Addresses internal crankcase pressure imbalances and oil seepage issues caused by warped or cracked factory plastic covers. This Engine Valve Cover Set maintains steady PCV airflow paths and restores factory-standard sealing geometry. Designed for a direct bolt-on integration with original mounting points and sensor locations.
• Package includes 2x Aluminum Valve Covers and 2x Pre-molded Gaskets. Installation Limit: Torque bolts to 8 N-m (approx. 71 in-lbs) in a cross-sequence pattern. Professional installation is mandatory to ensure proper sealant application on mating seams. Verify VCM (Variable Cylinder Management) sensor port compatibility before assembly.